
 |
 |
 |
 |
2 seat Advanced Ultralight |
2 seat trainer |
2 seat Heavy Hauler |
4 seat Cruiser |
Power: Jabiru 2200 (80HP)
or Jabiru 3300 (120HP) |
Power: Jabiru 2200 (85HP) |
Power: Jabiru 3300 (120HP) |
Powered: Jabiru 3300 (120HP) |
Cruise: 103mph / 126mph
Stall: 45mph |
Cruise: 152mph
Stall: 44mph |
Cruise: 132mph
Stall: 45mph |
Cruise: 132mph
Stall: 51mph |
Useful load: 525lbs/495lbs |
Useful load: 559lbs |
Useful load: 850lbs |
Useful load: 850lbs |
|
Jabiru
Aircraft PTY, Ltd of Australia produces a line of kit aircraft
that are among the most extensively tested and thoroughly developed
kit
planes
in the entire world.
Certified and proven
Jabiru's are certified in Australia, South Africa, and several
other countries and are used extensively for flight training
and light commercial purposes. The Jabiru airframe has proven itself
over hundreds of thousands of flight hours with the highest time
airframe approaching
6000 hours and many dozen more over 4500 hours all over the
world. Much of this flying has been in flight schools suffering
the abuse of student pilots performing touch & go landings
for hours on end. The fact that these airplanes continue to
be in demand for flight training speaks to the reliability,
predictability, and longevity of the design.
Exceptional flight characteristics
All Jabiru airplanes exhibit gentle and predictable controls
with no bad habits. Stalls are very gentle and cruise flight
for long periods with little or no control input is the norm.
Simple composite construction
Jabiru aircraft are available as kits or ready to fly. There
is no difference in the kit parts sold to homebuilders and the
parts that go into Jabiru's Certified Airframes. Homebuilders
are assured a high quality, top of the line product. Build
time for the inexperienced builder ranges between 500 and 600
hours
including engine and instrument installation
and paint. Little fiberglass work is required other than applying
reinforcing tapes. Finish work is minimal thanks to a gel coat
surface that minimizes pinholes and filling and sanding.
|